Cobra Friction Drive (CFD) features more
robust, longer wearing components for
increased reliability and performance.
All new wheel design with straight spoke
pattern (Like the CX50 Senior) resulting in
increased strength and reduced weight.
Larger, long-life wheel bearings featuring
captured wheel spacers for easier wheel
installation and removal.
New throttle cover keeps the throttle
mechanism protected from the elements.
All new graphics featuring updated Cobra
Logo.
Dry Weight: 81 lbs
Engine: Cobra 50cc 2-stroke
Bore x Stroke: 39mm x 41.7mm
Induction: Case Reed 14mm carb
Cooling: Water cooled
Clutch: Cobra 3Gx 3-Shoe
Transmission: Single-speed auto
Exhaust: Tuned pipe and silencer
Lubrication: Mixture lubrication
Frame: Double Cradle 4130 ChrMo Steel
Wheelbase: 908mm
Seat Height: 607mm
Ground Clearance: 216mm
Front Brakes: Hydraulic Disk (160mm)
Rear Brakes: Adjustable Drum
Front Suspension: Marzocchi 32mm 168mm
travel
Rear Suspension: Öhlins Piggyback 170mm
travel
Wheel Front / Rear: Cobra 10” Billet / Cobra
10” Billet
Tires Front / Rear: 2.5x10 / 2.75x10
Dry Weight: 91 lbs
Engine: Cobra 50cc 2-stroke
Bore x Stroke: 39mm x 41.7mm
Induction: Case Reed V-Force® Reed Valve
19mm carb
Cooling: Water cooled
Clutch: Cobra 3Gx 3-Shoe
Transmission: Single-speed auto
Exhaust: Tuned pipe and silencer
Lubrication: Mixture lubrication
Frame: Double Cradle 4130 ChrMo Steel
Wheelbase: 990mm
Seat Height: 680mm
Ground Clearance: 240mm
Front Brakes: Hydraulic Disk (160mm)
Rear Brakes: Hydraulic Disk (140mm)
Front Suspension: Cobra 30mm USD
210mm travel
Rear Suspension: Fox Piggyback Fully
Adjustable 248mm travel
Wheel Front / Rear: Cobra 12” Billet / Cobra
10” Billet
Tires Front / Rear: 2.5x12 / 2.75x10
Cobra Friction Drive (CFD) features more
robust, longer wearing components
increasing reliability and performance.
All new pipe design for increased
performance and improved packaging.
Moto Tassinari V-Force reed assembly for
more horsepower and torque.
New throttle cover keeps the throttle
mechanism protected from the elements.
Additional frame gusseting for increased
reliability and lateral stiffness.
All new graphics featuring updated Cobra
Logo.
New ignition cover allows for more boot
clearance.
Dry Weight: 123 lbs
Engine: Cobra 65cc 2-stroke
Bore x Stroke: 44.5mm x 41.7mm
Induction: Case Reed V-Force® Reed Valve
- 24mm Mikuni carb
Cooling: Water cooled Cylinder and Case
Clutch: Hydraulically actuated
Transmission: Six-speed sequential
Exhaust: Tuned pipe and silencer
Lubrication: Mixture lubrication
Frame: Twin Spar Oval HSLA
Wheelbase: 1140mm
Seat Height: 762mm
Ground Clearance: 250mm
Front Brakes: Hydraulic Disk (205mm)
Rear Brakes: Hydraulic Disk (165mm)
Front Suspension: Marzocchi 35mm USD
Adjustable 220mm travel
Rear Suspension: Öhlins Fully Adjustable
270mm travel
Wheel Front / Rear: 14” spoke / 12” spoke (Al
rims, Billet hubs, 9ga. spokes)
Tires Front / Rear: 60-100x14 Dunlop / 80-
100x12 Dunlop
Redesigned pipe for broader power and
increased horsepower and torque.
Optimized port timing for improved
horsepower and low-end torque.
Redesigned cases featuring improved
crankcase airflow to the cylinder, improved
case breathing, and increased oil flow to
clutch components.
Redesigned crankshaft assembly for
reduced friction and improved balance.
Redesigned gear selector mechanism
allows much easier and more positive gear
selection.
Additional shift drum bearing for smoother
gear changes.
All new front brake master cylinder featuring
improved brake modulation and feel.
Stiffer rear brake caliper carrier for more
positive brake feel.
Stronger and lighter front and rear hubs.
Additional frame gusseting for improved
reliability and increased lateral stiffness.
Redesigned swingarm increasing strength
and ease of maintenance.
All new graphics featuring new Cobra logo.
Dry Weight: 79 lbs
Engine: Morini 50cc 2-stroke
Bore x Stroke: 39mm x 41.7mm
Induction: Case Reed 12mm carb
Cooling: Water cooled
Clutch: 3-Shoe
Transmission: Single-speed auto
Exhaust: Tuned pipe and silencer
Lubrication: Oil Injection
Frame: Double Cradle 4130 ChrMo Steel
Wheelbase: 908mm
Seat Height: 559mm
Ground Clearance: 192mm
Front Brakes: Adjustable Drum
Rear Brakes: Adjustable Drum
Front Suspension: Marzocchi 32mm 140mm
travel
Rear Suspension: Öhlins 150mm travel
Wheel Front / Rear: 10” Cast Aluminum 10”
Cast Aluminum
Tires Front / Rear: 2.5x10 / 2.5x10
